Restumping & underpinning firms in regional NSW
Regional NSW carries the state's stumped weatherboard stock - and in the Hunter and Illawarra, ground movement has causes (old mine workings among them) that city checklists don't mention.
We have checked 3 licensed firms servicing Regional NSW: 3 offer underpinning, 3 offer restumping and 2 offer pier replacement. Between them they cover Newcastle, Lake Macquarie, the Hunter, Port Stephens, the Central Coast and Wollongong.
We do not publish firm names or contact details. Every firm behind this page is a real business we have checked against its own published details. Tell us what is happening with the house and we match you with one of them. You get their introduction by email; reply to it and they quote you, so you are not ringing around.
Foundation repair in regional NSW
Newcastle and Wollongong support both trades locally; further out, expect travel components in quotes and longer waits, which makes early enquiry worth it. Mining-subsidence areas have their own compensation schemes - worth checking before paying privately for movement a scheme may cover.
Restumping or underpinning: which one do you need in regional NSW?
The symptom tells you which trade to call. Sloping or bouncy floors, doors and windows sticking, and gaps opening between floor and skirting point to failed stumps under a timber-framed house: that is restumping (reblocking in Victoria). Stepped cracks in brickwork, cracks that widen with the seasons, and a slab home pulling away from its footings point to footing movement: that is underpinning. Our guides on the signs of failed stumps and the signs of subsidence walk through each, and restumping vs reblocking vs underpinning settles the terminology.
In regional NSW, both trades work the same suburbs: Newcastle, the Hunter and the Central Coast mix pier-and-beam cottages with slab homes on clay, so pier replacement and underpinning share the market. Get the diagnosis right before the quotes, or you will get three different diagnoses instead of three comparable prices.
Permits, licences and insurance in NSW
When approval is needed. NSW planning law sorts small residential projects into exempt development (no approval), complying development (fast-track certificate) and development needing a full council DA. Genuine like-for-like maintenance and minor repairs generally sit in the exempt category. Underpinning is a harder case: because it alters the structural support of the building, it typically cannot be waved through as simple maintenance, and most jobs proceed with approval, either through a council development application or, where the work qualifies, a complying development certificate issued by council or a registered private certifier. The boundaries depend on your property, the zoning and whether heritage controls apply, so the honest advice is to check with your council or a private certifier before work starts rather than rely on a contractor's assurance that "no one bothers with approval for this". Our regulations hub compares each state's approach.
Contractor licensing. Residential building work in NSW worth more than $5,000 (labour and materials) must be done by the holder of a contractor licence, regulated by Building Commission NSW alongside NSW Fair Trading. Since most underpinning jobs land between $10,000 and $40,000, every quote you receive should come from a licensed contractor, and the licence number should appear on the quote and the contract. Contract rules scale with value: work over $5,000 needs a written contract with prescribed terms, and work over $20,000 needs a full home building contract with a progress payment schedule. A contractor who wants a big job done on a handshake is exposing you, not saving you paperwork. Licensed work also carries statutory warranties under the Home Building Act, including that the work will be done with due care and skill and comply with the plans, which is a legal backstop you simply do not have with an unlicensed operator.
Home Building Compensation cover. Where the contract price is more than $20,000 including labour and materials, the contractor must take out Home Building Compensation (HBC) cover, run through the state insurer icare, before taking your deposit or starting work. HBC protects you if the builder dies, disappears or becomes insolvent and cannot finish or fix the job. You should be given a certificate of cover naming your property; keep it with the contract. A significant share of underpinning quotes cross the $20,000 line, so ask about HBC at quote stage.
Engineering sign-off. Underpinning in NSW is engineer-led by convention as much as by regulation. A structural or geotechnical engineer should diagnose the movement, design the fix and, ideally, inspect at key stages, with an engineer's report typically costing $600-$1,200 and design work up to $2,500. Where the job goes through an approval pathway, the certifier will expect engineering documentation, and your insurer may ask for it too if the damage becomes a claim. Before committing to any method, it is worth confirming whether you need underpinning at all: plenty of cracked NSW homes are moving seasonally rather than failing, and our underpinning guide explains the difference.
Full detail, including the checklist: the NSW rules explained.
What it costs in regional NSW
Expect underpinning at $10,000 to $40,000 and restumping or repiering at national per-stump rates, with travel charged outside the main centres.
| Job | Typical range 2026 | Notes |
|---|---|---|
| Single stump replaced | $500 - $700 | Minimum call-out often applies below about 8 stumps |
| Partial restump (8 to 20 stumps) | $4,000 - $12,000 | Common where one wet corner has failed |
| Full restump, weatherboard | $15,000 - $25,000 | Typically 40 to 60 stumps |
| Full restump, brick veneer | $20,000 - $30,000 | Heavier loads, more careful jacking |
| Underpinning, typical residential | $10,000 - $40,000 | Single corner can be under $10,000; whole perimeter on poor soil over $60,000 |
| Mass concrete underpinning | $2,000 - $5,000 per metre | A settled corner is often 3 to 6 metres |
| Screw piles | $3,000 - $7,000 per pile | A corner might need 2 to 4 piles |
| Resin injection | $8,000 - $25,000 per problem | Soil-dependent; insist on a soil test first |
| Engineer's assessment and design | $600 - $2,500 | Get it before the quotes for underpinning |
Full breakdowns: restumping costs, underpinning costs, when a partial restump is enough.
Getting quotes you can compare
A quote you can compare states the method, the extent (number of stumps, or metres, piles or zones for underpinning), the stump material, size and founding depth or the depth to bearing, who obtains the permit and whether its cost is included, the insurance that applies, what happens to cracks afterwards, and the warranty in writing. A number produced in the driveway without a look under the floor or an engineer's report is a guess, and the cheapest guess is the one that costs you later.
- Which licence or registration do you hold, and can I check it on the register?
- Is the permit your responsibility, and is it in this price?
- What stump material, size and founding depth are you quoting, and why?
- Have you priced against the engineer's report, or your own diagnosis?
- What is the warranty, and what insurance sits behind it if you close down?
- How many days on site, and will the house be habitable throughout?
More in choosing a contractor and what the process looks like.
Get matched with a firm servicing Regional NSW
One form, no phone tag. We email you the matched firm's introduction; reply to it and they respond directly with an itemised quote.
Common questions
Do I need an engineer's report before getting quotes?
For underpinning, yes: it is the only way to get three comparable prices instead of three diagnoses, and most reputable underpinners want one anyway. For a straightforward restump of a timber-framed house, an experienced restumper's subfloor inspection is usually enough, but any change of stump material or founding depth should be specified in writing.
How many quotes should I get, and how do I compare them?
Two or three, all priced against the same information. Send each firm the same description, photos and, for underpinning, the same engineer's report. Then compare method, extent, materials and depth line by line, not just the total. A quote that is much lower than the others has usually left something out.
Useful before you talk to anyone
Not ready to pick a firm?
Tell us about the problem instead - we'll match you with a licensed local firm.